Tell your friends about this article!

Friend's email address:
	For example, username@domain.com
Your email address:
	For example, username@domain.com
Subject:
Message:	I thought you might be interested in this page http://www.standards.co.nz/touchstone/Issue+39/Building/DRAFT+STANDARDS+FOR+COMMENT.htm at http://www.standards.co.nz/touchstone/

This message has been sent to you from Touchstone, Standards New Zealand's free electronic magazine. Standards New Zealand is the country's leading Standards body, developing and promoting Standards for the benefit of all New Zealanders.

When the message is sent, you'll automatically be copied on the message. The text immediately above will be added to the message automatically, identifying the message as coming from Touchstone.

Thanks

Your email has been sent

Issue 39 – Jun 12

RSS Feed Print page Email to a friend

Keyword

VIEW PAST ISSUES

Back to Home page

Back to Standards website

DRAFT STANDARDS FOR COMMENT

Issue 39 – June 2012

Free to download from our website: www.standards.co.nz

DR AS/NZS 1080.1 Timber – Methods of test – Part 1: Moisture content (Revision of AS/NZS 1080.1:1997 - to be AS/NZS 1080.1:201X)

Sets out the oven-dry method (see Clause 4) for determining the moisture content of timber as the only accurate method of truly assigning, with confidence, a moisture content to a piece of timber.

Public comment on this draft Standard closes on 1 August 2012.

DR AS/NZS 1170.2 AMD 2 Amendment 2 to AS/NZS 1170.2:2011 Structural design actions - Part 2: Wind actions

Amendment applies to the Scope, Clauses 2.5.5, 2.5.6, 2.5.7, 4.2.1, 4.2.2, 4.2.3, 5.3.2, 5.3.4, Tables 3.1, 4.1(A), 4.1 (B), 6.1, D11, E3, E4, E6(A), E6(B), E6(C) and Appendix D.

Public comment on this draft Amendment closes on 6 August 2012.

DR AS/NZS 4087 AMD 1 CP Amendment 1 to AS/NZS 4087:2011 Metallic flanges for waterworks purposes

Draft Amendment applies to Appendix B.

Public comment on this draft Amendment closes on 3 July 2012.