Quick links

AS/NZS 60598.1:2003

Luminaires - General requirements and tests

Specifies general and safety requirements for luminaires with related tests for mechanical and electrical constructions. This document is reproduced from the Lumex WG draft Edition 6 of IEC 60598-1 and varied for Australian/New Zealand conditions.

Publishing Information:

ICS Codes:

References:

Standards NZ References:

• 3000:2000SOFTBOUND(AS/NZS)
• 3100:2002(AS/NZS)
• 3108:1994(AS/NZS)
• 3109.1:1996(AS/NZS)
• 3112:2000(AS/NZS)
• 3131:2001(AS/NZS)
• 4695.112:1996(AS/NZS)
• 4695.2.2:1996(AS/NZS)
• 4695.707:1996(AS/NZS)
• 60155:2000(AS/NZS)
• 60598.2.10:1998(AS/NZS)
• 60598.2.4:1998(AS/NZS)
• 60901:2003(AS/NZS)
• 61347.2.1:2002(AS/NZS)
• 61535.1(INT):2001(AS/NZS)

Non Standards NZ References:

• AS 1104 Informative symbols for use on electrical and electronic equipment (identical to IEC 60416 and IEC 60417)


• AS 1939 Degrees of protection provided by enclosures for electrical equipment (IP Code) (identical to IEC 60529)


• IEC 60061-2 Lamp caps and holders together with gauges for the control of inter-changeability and safety – Part 2:Lampholders.


• IEC 60061-3 Lamp caps and holders together with gauges for the control of inter-changeability and safety – Part 3:Gauges.


• IEC 60065:1985 Audio,video and similar electronic apparatus —Safety requirements (Corrigendum 1:2002)


• IEC 60068-2-75 Environmental testing – Part 2:Tests —Test Eh;Hammer tests


• IEC 60079 (all parts) Electrical apparatus for explosive gas atmospheres


• IEC 60085 Thermal evaluation and classification of electrical insulation


• IEC 60216 Guide for the determination of thermal endurance properties of electrical insulating materials


• IEC 60227 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V


• IEC 60238 Edison screw lampholders .


• IEC 60245 Rubber insulated cables of rated voltages up to and including 450/750 V


• IEC 60357 Tungsten halogen lamps (non-vehicle)—Performance specifications


• IEC 60360 Standard method of measurement of lamp cap temperature rise (Corrigendum 1:1999)


• IEC 60364-5-51 Electrical installations of buildings – Part 5-51:Selection and erection of electrical equipment —common rules


• IEC 60384-14 Fixed capacitors for use in electronic equipment – Part 14:Sectional specification:Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (plus Amendment 1:1995)


• IEC 60400 Lampholders for tubular fluorescent lamps and starter-holders.


• IEC 60432-1 Incandescent lamps —Safety specifications – Part 1::Tungsten filament lamps for domestic and similar general lighting purposes. Amendment 1 (1995)


• IEC 60432-2 Incandescent lamps —Safety specifications – Part 2::Tungsten halogen lamps for domestic and similar lighting purposes


• IEC 60432-3 Incandescent lamps —Safety specifications – Part 3::Tungsten halogen lamps (non-vehicle)


• IEC 60570 Electrical supply track systems for luminaires


• IEC 60598.1:2003 Draft Ed. 6


• IEC 60634 Heat test source (H.T.S.)lamps for carrying out heating tests on luminaires


• IEC 60662 High pressure sodium vapour lamps.


• IEC 60664-1 Insulation coordination for equipment within low-voltage systems – Part 1: Principles,requirements and tests


• IEC 60684 Specification for flexible insulating sleeving


• IEC 60695-2-10 Fire hazard testing – Part 2--10:Glowing/hot wire based test methods —Glow-wire apparatus and common test procedure


• IEC 60838 Miscellaneous lampholders


• IEC 60972 Classification and interpretation of new lighting products. Amendment 1 (1991)


• IEC 60989 Separating transformers,autotransformers,variable transformers and reactors


• IEC 60990 Methods of measurement of touch-current and protective conductor current


• IEC 61032:1997 Protection of persons and equipment by enclosures —Probes for verification


• IEC 61058-1 Switches for appliances – Part 1:General requirements.


• IEC 61184 Bayonet lampholders


• IEC 61195 Double capped fluorescent lamps —Safety specifications


• IEC 61199:1999 Single-capped fluorescent lamps – Safety specifications


• IEC 61558-2 (all parts) Safety of power transformers,power supply units and similar – Part 2: Particular requirements


• IEC 62035 Discharge lamps (excluding fluorescent lamps)—Safety specifications


• IEC 80416-1 Basic principles for graphic symbols for use on equipment – Part 1:Creation of symbol originals


• ISO 1891 Bolts,screws,nuts and accessories –Terminology and nomenclature


• ISO 4046-4 Paper,board,pulp and related terms – Vocabulary-Part 4:Paper and board grades and converted product


• ISO 75-2 Plastics –Determination of temperature of deflection under load – Part 2::Plastics and ebonite